102
TK 56171-2-OP-EN
Change Mode Menu choose Keypad Lockout and press the SELECT Soft Key
(
).
Figure 122.
Select Key
A Confirmation Request will appear. To activate Keypad Lockout press the
YES Soft Key. To leave this menu without turning the Keypad Lockout
feature on, press the NO Soft Key (
).
Figure 123.
Yes, No Soft Keys
If the YES Soft Key was pressed, Keypad Lockout is active.
•
If the keypad is locked, only the On Key and Off Key function. The keypad
will remain locked even if the unit is turned off and back on.
•
If Keypad Lockout is active, press and hold any soft key for five seconds
to deactivate the feature.
•
To return to the Standard Display, press the EXIT Soft Key again.
Start Sleep Mode
If this feature enabled in Guarded Access > Main Menu Configuration, the
operator can select and set Sleep Mode from the Mode Menu. Sleep Mode is
used to keep the engine warm and the battery charged when the unit is not
in use. When the unit is Sleep Mode, the display will show “SLEEP” and the
