TK 56218-2-OP-EN
99
To turn Cycle Sentry back on, press the SELECT Key again.
To leave this menu without changing the setting, press the EXIT Soft Key. To
return to the Standard Display, press the EXIT Soft Key again.
N
No
otte
e:: Cycle Sentry Mode can also be turned on and off using the Cycle
Sentry Key on the HMI Control Panel.
Select Temperature Units
If this feature enabled in Guarded Access > Main Menu Configuration, the
operator can select temperature units to be displayed as either degrees
Fahrenheit or degrees Celsius. From the Main Menu > Change Mode menu
choose Fahrenheit or Celsius and press the SELECT Soft Key (
Figure 122.
Fahrenheit or Celsius, Select Key
Choose the desired Temperature Units using the UP and DOWN Soft Keys
and press the SELECT Soft Key to select the choice (
Figure 123.
Up, Down, Select Keys
Temperatures will be displayed in the selected units.
•
To leave this menu without changing the setting, press the EXIT Soft
Key. To return to the Standard Display, press the EXIT Soft Key again.
