Ingersoll-Rand THERMO KING Precedent C-600, Operator'S Manual

Page: 38 / 148

38 TK 56218-2-OP-EN
• OPTISET PLUS
– SEND
• Send OptiSet Plus files
– RETRIEVE
• Retrieve OptiSet Plus files
The Flash Drive is also available from the Main Menu.
The Flash Drive Menu will time out about 30 seconds after the engine starts.
When the Flash Drive Menu times out, the Standard Display will appear. To
go to the Standard Display, immediately press the EXIT Key.
Configurable Soft Keys
When the Standard Display is shown, the default functions of the two center
soft keys are GAUGES and SENSORS (
Figure 16, p. 38 ).
Figure 16. Soft Keys
The functions of these two keys can be changed as required for customer
convenience. The functions of these two soft keys on the Standard Display
can be re-assigned to any of the following functions using the Guarded
Access > Main Menu Configuration menu:
• Gauges • Pretrip • SOT (start of trip)
• Sensors • Data Logger • Hourmeters
The GAUGES and SENSORS functions are always available from the
Maintenance Menu.
In the example shown ( Figure 17, p. 39 ), the soft key functions from the
Standard Display have been changed to PRETRIP and SOT (Start of Trip
marker). The GAUGES and SENSORS functions are always available from
the Maintenance Menu.
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss