Ingersoll-Rand QS50P3, Product Information

Page: 3 / 60

47116942_ed2 EN-1
EN
Product Safety Information
Intended Use:
These tools are designed to remove and install threaded fasteners.
For additional information refer to Air Pulse Tool Product Safety Information Manual
Form 04584983.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model Style
Drive
Free
Speed
Sound Level dB(A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
Type Size rpm † Pressure (L
p
) Level *K
QS50P3 Pistol Square 3/8” 4300 67.4 <2.5 ---
QS50PQ1 Pistol Quick Change 1/4” 4300 67.4 <2.5 ---
QS60P3 Pistol Square 3/8” 5,300 71.0 <2.5 ---
QS60PQ1 Pistol Quick Change 1/4” 5,300 71.0 <2.5 ---
QS70P3 Pistol Square 3/8” 6,800 76.0 2.9 1.4
QS70PQ1 Pistol Quick Change 1/4” 6,800 76.0 2.9 1.4
QS80P3 Pistol Square 3/8” 6,800 76.4 3.1 0.7
† K
pA
= 3dB measurement uncertainty
*K= Vibration measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585747 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-off valve 9. Oil
5. Hose diameter 10. Grease
After each 150,000 cycles, or as experience indicates, drain and refill the Impulse Unit Drive
Assembly using the Fluid Replacement Kit (Part No. EQ106S-K400). Lubricate the hex drive and
the output shaft before assembly.