2
03524014_ed9
WARNING
General Product Safety Information
•
Read and understand this manual before operating this motor.
•
It is your responsibility to make this safety information available to others that will operate this motor.
•
Failure to observe the following warnings could result in injury.
WARNING
•
Always operate, inspect and maintain this motor in accordance with American National Standards Institute Safety
Code for Portable Air Tools (ANSI B186.1).
•
For safety, top performance and maximum durability of parts, operate this motor at 90 psig (6.2 bar/620 kPa) air
pressure at the inlet with 1/2” (13 mm) air supply hose.
•
Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any
accessory on this motor.
•
Do not use damaged, frayed or deteriorated air hoses and fittings.
•
Keep hands, loose clothing and long hair away from rotating end of motor.
•
Anticipate and be alert for sudden changes in motion during start up and operation of any motor.
•
Motor shaft may continue to rotate briefly after the throttle is released.
•
Do not lubricate motor with flammable or volatile liquids such as kerosene, diesel or jet fuel.
•
Do not remove any labels. Replace any damaged label.
•
Use accessories recommended by Ingersoll-Rand.
•
This motor is not designed for working in explosive atmospheres.
•
This motor is not insulated against electric shock.
Safety Symbol Identification
Safety Information - Explanation of Safety Signal Words
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or property damage.
Indicates information or a company policy that relates directly or indirectly to the safety of
personnel or protection of property.
DANGER
WARNING
CAUTION
NOTICE
(Dwg. MHP2454)
(Dwg. MHP2455)
(Dwg. MHP0884)