Ingersoll-Rand EL0109E, Product Information

Page: 2 / 52

EN-1 16578668_ed1
EN
Product Safety Information
Intended Use:
These hand-held electric tools are designed for threaded joint fastening applications.
WARNING
Use only with EC24E, EC24U or EC24E-N Controllers.
Do not adjust the torque setting higher than 7 on the Torque Scale.
Duty Cycle:
MAX 0.5 sec “ON”
MIN 3.5 sec “OFF”
Do not tighten more than 900 tapping screws (size: 2 mm, length: 4 mm) per hour.
For additional information refer to Hand-Held Electric Tools used with a Controller Product
Safety Information Manual Form 16573685.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model
Volts
(Direct Current)
Revolutions
Per Minute
Torque Range Weight
in - lbs Nm lbs kg
EL0109E 24 650 - 950 0.26 - 1.30 0.03 - 0.15 0.8 0.36
EL0410E 24 750 - 1000 0.44 - 4.79 0.05 - 0.54 0.9 0.41
EL0410EC 24 750 - 1000 0.44 - 4.79 0.05 - 0.54 1.0 0.45
EL1007E 24 500 - 700 1.74 - 10.44 0.19 - 1.17 0.9 0.41
EL1007EC 24 500 - 700 1.74 - 10.44 0.19 - 1.17 1.0 0.45
Model
Length Drive Size Sound Pressure dB (A)
(ANSI S5.1 1971)
Vibration Level
(ISO28927)
in. mm in. m/s
2
EL0109E 8.81 223.7 0.16 RD. 56.9 < 2.5
EL0410E 9.25 234.9 0.25 HEX 56.9 < 2.5
EL0410EC 10.25 260.3 0.25 HEX 56.9 < 2.5
EL1007E 9.25 234.9 0.25 HEX 56.9 < 2.5
EL1007EC 10.25 260.3 0.25 HEX 56.9 < 2.5
Torque Adjustment
To adjust the torque on these screwdrivers, proceed as follows:
1. Determine the torque output of the tool by checking a tightened fastener with a torque
wrench.
2. Increase or decrease the torque output by rotating the Spring Adjusting Ring. Rotating
the Ring clockwise to a higher number on the Torque Scale increases torque output while
rotating the Ring counterclockwise to a lower number decreases the torque output.
NOTICE
The numbers from one to seven on the Torque Scale are reference numbers only and are
not an indication of actual torque output.
•
•
•