Ingersoll-Rand Club Car VILLAGER 8 ELECTRIC, Operator'S Manual

Page: 69 / 88

VILLAGER 8 ELECTRIC
Operators Manual
TPCC01CI00EN021 (Edition C)
Page 67
CHARGING THE BATTERIES WITH ACCESSORIES ON CAN CAUSE
A FIRE AND SERIOUS PERSONAL INJURY. TURN OFF ALL
ACCESSORIES BEFORE CHARGING THE BATTERIES.
WARNING
LOOSE CORD CONNECTIONS CAN CAUSE A FIRE. MAKE SURE
THAT ALL CORD CONNECTIONS AT THE RECEPTACLE ARE CLEAN
AND TIGHT.
To charge with an onboard charger:
1. Disable the vehicle.
2. Turn off all accessories.
3. Connect the AC cord (1) to the power source.
Note: The vehicle will start to charge in 10 seconds or less.
The charge indicator light will flash and the multi-purpose buzzer will operate when the
vehicle starts to charge.
4. Before vehicle operation, disconnect and retract the AC cord.
BATTERY ELECTRICAL CONNECTION
DISCONNECT THE BATTERIES
Before the batteries are disconnected:
• Disable the vehicle.
To disconnect the batteries:
DANGER
BATTERIES DISCONNECTED OR CONNECTED WITH THE RUN/
TOW SWITCH SET TO RUN CAN CAUSE A BATTERY EXPLOSION
AND SERIOUS PERSONAL INJURY. SET THE RUN/TOW SWITCH
TO TOW BEFORE THE BATTERIES ARE DISCONNECTED OR
CONNECTED.
1. Set the Run/Tow switch to TOW.
2. Disconnect the negative (-) cable (1).
130798-000017
(-)
(
+
)
1
2
G-
Battery Maintenance
Battery Electrical Connection
9