Ingersoll-Rand BXR-60, Instruction Manual For Installation / Operation / Maintenance / Parts

Page: 14 / 67

SECTION 4 - OPERATING INSTRUCTIONS
4-4
Figure 4-4
After the engine starts, set the Throttle Lever (Figure 4-5) at the low speed position “LOW” and warm it up without load for a few
minutes. Fully open CHOKE LEVER (1, Figure 4-3) gradually.
RUNNING
1. Shift the Throttle Lever (Figure 4-5) to “HIGH” speed position quickly. The rammer starts to vibration and move forward.
Figure 4-5
STOPPING
1. Shift the throttle lever (Figure 4-5) to “LOW” speed position.
2. Allow the engine to run at low speed for 2-3 minutes before stopping.
3. Turn the STOP SWITCH (1, Figure 4-6) counterclockwise to the position “O”(OFF).
1