S237-SA (en)
Page 5 of 8
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part indicated by a
bullet (•) for every four tools in service.
Not illustrated.
PART LIST
Item Description
(size)
Qty Part No.
1 Backhead Assembly
(includes item 2, 7, 8,
9, 10 and 11)
(1) S237-A102
2 Oiler Body Assembly
(includes item 3, 4, 5 and 6)
(1) 88HL60-A198
3 Oiler Body O-ring (Small)
(1) 88L60-103
4 Oiler Felt (2)
(1) R1-75
5 Oiler Adjusting Screw
(1) R1-71A
6 Oiler Body O-ring (Large)
(1) WFS182-210
7 Oiler Body Retainer
(1) 88HL60-298
8 Oil Chamber Plug
(1) R2-227
9 Air Strainer Screen
(1) P25-61A
10 Air Strainer Cap
(1) P25-268
11 Air Strainer Plug
(1) P25-536
12 Backhead Lock Washer
(4) 34U-58
13 Backhead Cap Screw
(4) 834-638
14 Housing
(1) S237-A240
15 Grease Fitting
(1) 23-188
16 Housing Plug
(1) R2-227
17 Housing Seal
(1) P226-283A
18 Controller Assembly
(1) 99V77-A524
19 Rotor Bearing Seal Assembly
(1) 99V60-A28A
20 Controller Retaining Nut
(1) G8-120A
21 Rotor Bearing Cage
(1) 99V60-107A
22 Rear End Plate Gasket
(1) 99V60-739
23 Rear End Plate
(1) 99V60-A12
24 Cylinder Assembly
(includes item 25 and 26)
(1) 99V60-A3
25 End Plate Dowel
(1) 5040-6
26 Cylinder Dowel
(1) 502B-120
27 Rotor
(1) 99V60-53
28 Rotor Key
(1) R43F-70
29 Vane Packet (set of 4 Vanes)
(1) 99V60-42-4
Item Description
(size)
Qty Part No.
30 Front End Plate
(1) 99V60-11
31 Motor Clamp Washer
(2) 99V60-207
32 Rotor Shaft
(1) P226-204
33 Shaft Bearing
(2) G57E-24
34 Bearing Spacer
(1) P226-265
35 Seal Spacer
(1) P226-100
36 Housing Snap Ring
(1) S12-118
37 Water Seal Cap Assembly
(includes item 38 and 39)
(1) P226-A115
38 Water Seal
(2) P225-153
39 Impeller Spacer
(1) P225-152
40
Impeller Shim (as required)
0.010” thick
(1) P25-151-10
0.025” thick
(1) P25-151-25
41 Impeller
(1) P225-143
42 Impeller Retaining Washer
(1) P225-157
43 Impeller Retaining Screw
(1) P225-156
44
Impeller Cover Shim (as required)
0.005” thick (blue)
(1) P225-145-5
0.010” thick (brown)
(1) P225-145-10
0.015” thick (pink)
(1) P225-145-15
0.025” thick (white)
(1) P225-145-25
45 Impeller Cover
(1) P225-144
46 Inlet
(1) SPS-01118
47 Impeller Cover Lock Washer
(4) P225-67
48 Impeller Cover Cap Screw
(4) P225-146
49 Controller Wrench
(1) 99V60-950
50 Seal Pressing Tool for Controller
(1) 99V60-951
51 Bearing Clamp to release Controller
(1) 99V60-A952
Nameplate
(1) P25-99
Nameplate Screw
(4) PS251-302
