Page 8 of 12
PX03P-XXX-XXX-AXXX (en)
123
�
129
103L
136
�
123
174
�
173
�
121
118
200
�
132
141
�
140
167
169
�
170
168
�
171
�
144
�
144
�
101
118
121
173
�
174
�
130
236
139
�
111
135
138
�
166
�
107
�
137
137
�
�
137
�
134
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(123) screw, 4 - 6 in. lbs (0.45 - 0.68 Nm).
(134) bolt, 15 - 20 in. lbs (1.7 - 2.3 Nm), wait 10 minutes,
then re-torque to 15 - 20 in. lbs (1.7 - 2.3 Nm).
LUBRICATION / SEALANTS
�
ASSEMBLY TORQUE REQUIREMENTS
�
�
Apply Lubriplate (94276) to “O” rings, “U” Cups & mating parts.
232
103R
MAJOR VALVE
PILOT VALVE
PILOT VALVE
Figure 3
PARTS LIST / PX03P-XXX-XXX-AXXX AIR MOTOR SECTION
MAJOR VALVE REASSEMBLY
Assemble new (139 and 138) U” cups on (111) spool -
LIPS MUST FACE EACH OTHER.
Assemble (137) O” rings to (136) large plug.
Assemble (137 and 166) O” rings to (107) small plug.
Insert (111) spool into (136) large plug, then insert (136)
large plug into (135) valve block, being sure the (111)
spool is rotated to accept (140) valve insert.
Assemble (107) small plug into (135) valve block.
1.
2.
3.
4.
5.
Assemble (140) valve insert and (141) valve plate to
(135) valve block. Note: Assemble (140) valve insert with
dished” side toward (141) valve plate. Assemble (141)
valve plate with identification dot toward (132) gasket.
Assemble (132 and 200) gaskets and (135) valve block
to (101) center body, securing with (134) bolts. NOTE:
Tighten (134) bolts to 15 - 20 in. lbs (1.7 - 2.3 Nm).
Assemble (130) gasket and (129) muffler baffle to (101)
center body, securing with (123) screws.
NOTE:
Tighten
(123) screws to 4 - 6 in. lbs (0.45 - 0.68 Nm).
6.
7.
8.