Ingersoll-Rand 7RL-EU Series, Product Information, Page: 3 / 76

80167497_ed2 EN-1
EN
Product Safety Information
Intended Use:
These tools are designed to install or remove threaded fasteners.
For Additional information refer to Air Screwdriver Product Safety Information Manual
Form 04585006.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model
Clutch
Type
Torque Range
(soft draw)
Free
Speed
Drive
in-lbs (Nm) rpm Type size
7RLL2C6-EU Cushion 15-100 (1.7-11.3) 1,400 Square 3/8”
7RLL3C6-EU Cushion 25-110 (2.8-12.5) 1,400 Square 3/8”
7RLM3C6-EU Cushion 25-130 (2.8-14.8) 800 Square 3/8”
7RLL3D6-EU Stall 100 (11.3) 1,400 Square 3/8”
7RLM3D6-EU Stall 175 (19.8) 800 Square 3/8”
7RLN3D6-EU Stall 265 (29.9) 500 Square 3/8”
7RLM2D6-EU Stall 175 (19.8) 800 Square 3/8”
Model
Sound Level dB (A) ANSI S5.1-1971
Vibration Level
(ISO28927)
Pressure Power (ISO 3744) m/s²
7RLL2C6-EU 81.6 94.6 < 2.5
7RLL3C6-EU 78.9 91.9 < 2.5
7RLM3C6-EU 79.3 92.3 < 2.5
7RLL3D6-EU 78.9 91.9 < 2.5
7RLM3D6-EU 78.9 91.9 < 2.5
7RLN3D6-EU 81.5 94.5 < 2.5
7RLM2D6-EU 82.3 95.3 < 2.5
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585788 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as: