READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
OPERATOR’S MANUAL
670053-X-X
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED:
3
-
24
-0
6
REVISED:
5-11-15
(REV. F)
1-1/2" DIAPHRAGM PUMP
1:1 Ratio (metallic) with Cone Checks
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET - BRYAN, OHIO 43506
(800) 495-0276
FAX (800) 892-6276
© 2015
CCN 15252828
arozone.com
SERVICE KITS
Refer to the Model Description Chart to match the pump
material options.
637118-C for air section repair (see page 6).
637124-XX for fluid section repair (see page 4).
PUMP DATA
Models . . . . . . . . . . . . . . . . . . . see “Model Description Chart”
for “-XXX”
Pump Type . . . . . . . . . . . . . . . Metallic Air Operated Double
Diaphragm
Material . . . . . . . . . . . . . . . . . . see “Model Description Chart”
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.5 lbs (22.9 kgs)
Maximum Air Inlet Pressure . . . . . . . . 100 psig (6.9 bar)
Maximum Outlet Pressure . . . . . . . . . . 10 psig (0.69 bar)
Maximum Outlet Pressure . . . . . . . . . . 100 psig (6.9 bar)
Maximum Flow Rate
(flooded inlet)
. . . 85. gpm (321.7 lpm)
Displacement / Cycle @ 100 psig . . . . 0.64 gal (2.42 lit)
Maximum Particle Size . . . . . . . . . . . . . 1/2” dia. (12.7 mm)
Maximum Temperature Limits (diaphragm / ball / seal /
seat material)
E.P.R. / EPDM . . . . . . . . . . . . . . 60° to 280° F (-51° to 138° C)
Nitrile . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Santoprene® . . . . . . . . . . . . . . -40° to 225° F (-40° to 177° C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40 ° to 225° F (4° to 107° C)
Dimensional Data . . . . . . . . . . . . . . . . . . . see page 8
Noise Level @ 70 psig, 60 cpm
. . . . . . 80.5 dB(A)
Tested with 350-568 muffler assembly installed.
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (LA
eq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart. However, certain
combinations may not be recommended, consult a representative
or the factory if you have questions concerning availability.
MODEL DESCRIPTION CHART
670053 - 0 X X - 03
Center Body Material - Aluminum
Fluid Connection - 1-1/2 - 11-1/2 NPTF - 1
Fluid Cap / Manifold Material - Aluminum
Hardware Material - Carbon Steel
Cone Check Material
J - Nitrile
K - EPR
EXAMPLE: MODEL # 670053-0J2
FLUID SECTION SERVICE KIT # 637124-J2
670053 - 0 X X - X
Cone Check Diaphragm
637124 - X X
Diaphragm Material
2 - Nitrile
B - Santoprene
Check Type
0 - Cone Check
FLUID SECTION SERVICE KIT SELECTION
Cone Check Flow
03 - Bottom Discharge
Figure 1