background image

2

03540861_ed3

WARNING

General Product Safety Information

Important Safety Information enclosed.

Read and understand this manual before operating this product.

It is your responsibility to make this safety information available to others that will operate this product.

Safety Information - Explanation of Safety Signal 

Indicates an imminently hazardous situation which, if not avoided, will result in death or 
serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or 
serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or 
moderate injury or property damage.

Indicates information or a company policy that relates directly or indirectly to the safety of 
personnel or protection of property.

DANGER

WARNING

CAUTION

NOTICE

WARNING

Failure to observe the following warnings could result in injury.

Placing Motor in Service

Always install, operate, inspect and maintain this product 
in accordance with all applicable standards and 
regulations (local, state, country, federal, etc.).

Always use clean, dry air at 90 psig (6.2 bar/620 kPa) 
maximum air pressure at the inlet. Higher pressure may 
result in hazardous situations including excessive speed, 
rupture, or incorrect output torque or force.

Be sure all hoses and fittings are the correct size and are 
tightly secured. See Dwg. TPD905-2 for a typical piping 
arrangement.

Ensure an accessible emergency shut off valve has been 
installed in the air supply line, and make others aware of 
its location.

Do not use damaged, frayed or deteriorated air hoses 
and fittings.

Keep clear of whipping air hoses. Shut off the 
compressed air before approaching a whipping hose.

Always turn off the air supply and disconnect the air 
supply hose before installing, removing or adjusting any 
accessory on this motor, or before performing any 
maintenance on this motor.

Do not lubricate with flammable or volatile liquids such as 
kerosene, diesel or jet fuel. Use only recommended 
lubricants.

Keep work area clean, uncluttered, ventilated and 
illuminated.

Do not remove any labels. Replace any damaged label.

Using the Motor

Always wear eye protection when operating or 
performing maintenance on this motor.

Always wear hearing protection when operating this 
motor.

Always use Personal Protective Equipment appropriate 
to the product used and material worked. This may 
include dust mask or other breathing apparatus, safety 
glasses, ear plugs, gloves, apron, safety shoes, hard hat 
and other equipment.

Keep others a safe distance from your work area, or 
ensure they use appropriate Personal Protective 
Equipment.

This motor is not insulated against electric shock.

This motor is not designed for working in explosive 
atmospheres.

Keep hands, loose clothing, long hair and jewelry away 
from motor.

Motor and/or accessories may briefly continue their 
motion after throttle is released.

Ensure work pieces are secure. Use clamps or vises to 
hold work piece whenever possible.

Do not use motor when tired, or under the influence of 
medication, drugs, or alcohol.

Never use a damaged or malfunctioning motor or 
accessory.

Do not modify the motor, safety devices, or accessories.

Do not use this motor for purposes other than those 
recommended.

Use accessories recommended by 

Ingersoll-Rand

.

Safety Symbol Identification

(Dwg. MHP2598) 

Wear Respiratory

Protection

Wear Eye

Protection

Wear Hearing

Protection

Read Manuals Before

Operating Product

Summary of Contents for 3840M/VSM-6171









Reviews: