Service Center
Ingersoll–Rand Company510 Hester DriveWhite HouseTN 37188USATel: 1 800 TOOL HLP
Page 1: ... and or excessive moisture can ruin the motor of an air tool Do not lubricate tools with flammable or volatile liquids such as kerosene diesel or jet fuel Do not remove any labels Replace any damaged label USING THE TOOL Always wear eye protection when operating or performing maintenance on this tool Always wear hearing protection when operating this tool Keep hands loose clothing and long hair aw...
Page 2: ...r deteriorated air hoses and fittings WARNING Keep body stance balanced and firm Do not overreach when operating this tool WARNING Operate at 90 psig 6 2 bar 620 kPa Maximum air pres sure 90 psig 6 2bar 620kPa PLACING TOOL IN SERVICE LUBRICATION Ingersoll Rand No 50 Ingersoll Rand No 100 Always use of an air line lubricator with these tools We recommend the following Filter Lubricator Regulator Un...
Page 3: ...rottle Valve Cap Assembly 287 A266 44 Hammer Case Gasket 287 36 12A Throttle Valve Cap O ring 291 566 45 Hammer Case Cap Screw 4 291 105 13 Reverse Valve Assembly 285 A329 46 Hammer Case Cap Screw 14 Reverse Valve O ring 291 338 Lockwasher 4 291 104 15 Reverse Valve Stop Pin 291 332 47 D Handle 291 48 16 Reverse Valve Detent Ball 291 333 48 D Handle Cap Screw 4 291 49 17 Ball Spring 291 334 49 D H...
Page 4: ...Service Center Ingersoll Rand Company 510 Hester Drive White House TN 37188 USA Tel 1 800 TOOL HLP ...
