Operating Instructions
66
Figure 137: Select Key
A Confirmation Request will appear. To activate
Keypad Lockout press the YES Soft Key. To
leave this menu without turning the Keypad
Lockout feature on, press the NO Soft Key
(Figure 138).
Figure 138: NO Soft Key
If the YES Soft Key was pressed Keypad Lockout
is active. Repeat the process to turn the Keypad
Lockout feature off.
•
If the keypad is locked, only the On Key and
Off Key function. The keypad will remain
locked even if the unit is turned off and back
on.
•
If Keypad Lockout is active, press and hold
any soft key for 5 seconds to deactivate the
feature.
•
To return to the Standard Display press the
EXIT Soft Key again.
Start Sleep Mode
If this feature enabled in Guarded Access > Main
Menu Configuration, the operator can select and
set Sleep Mode from the Mode Menu. Sleep
Mode is used to keep the engine warm and the
battery charged when the unit is not in use. When
the unit is Sleep Mode the display will show
“SLEEP” and the current time. To turn the feature
on, from the Change Mode menu choose Start
Sleep Mode and press the SELECT Soft Key
(Figure 139).
Figure 139: Select Soft Key
The following features are available in Sleep
Mode. Follow the display prompts to select and
set the features.
•
Program Wakeup Time:
This feature allows
a wakeup time to be specified. When the
selected time is reached the unit will start and
resume normal operation.
•
If a Wakeup Time is selected the following
features are available:
•
Day to Wake Up:
This feature allows the day
the unit is to wake up to be specified.
•
Hour to Wake Up:
This feature allows the
hour the unit is to wake up to be specified.
•
Minute to Wake Up:
This feature allows the
minute the unit is to wake up to be specified.
•
Run Pretrip on Wakeup:
This feature allows
a Pretrip Test to be automatically run when the
unit wakes up.
SmartPower Electric Standby
Option
The Diesel/Electric Standby selection from the
Main Menu allows the operator to manually select
diesel or electric mode operation on units
equipped with the electric standby SmartPower
option. The unit can also be programmed to
automatically switch to Electric Mode operation
when standby power is available and to
automatically switch to Diesel Mode operation if
standby power fails or is removed. If the unit is
programmed to automatically switch from diesel
to electric and/or electric to diesel the associated
screens do not appear.
•
If the unit is currently operating in Diesel
Mode the ELECTRIC STANDBY selection
will appear in the Main Menu.
CHANGE MODE
DOWN
EXIT
SELECT
UP
TURN ON CYCLE SENTRY MODE
FAHRENHEIT
KEYPAD LOCKOUT
START SLEEP MODE
ON
OFF
ON
OFF
KEYPAD LOCKOUT
ARE YOU SURE?
NO
YES
ON
OFF
CHANGE MODE
DOWN
EXIT
SELECT
UP
TURN ON CYCLE SENTRY MODE
FAHRENHEIT
KEYPAD LOCKOUT
START SLEEP MODE
