6. If another auto-program is desired, press the PRESET button until the desired food:
BEEF, PORK, CHICKEN or STEW illuminates. The auto-programmed TIME and LOW,
HIGH temperature will be displayed on the screen. (See Figure 6C.)
7. As some recipe ingredients are cooked at different times, and reheating to serve
foods does not require as much cook time, the target cook time may be adjusted
at any time while the Slow Cooker is cooking. For example: to change the
CHICKEN cook time to 3-1/2 hours, first press the TIME button. Press the DOWN
arrow until the target cook time (03:30) is displayed. (See Figure 6C.)
8. After 5 seconds, the Slow Cooker will begin operation or press POWER button to
begin cooking immediately.
9. The COOK (cooking pot) icon and CLOCK icon will illuminate (See Figure 6D.);
the timer will count down to 00:00; 3 audible beeps signal cook time is complete.
10. Temperature will automatically drop to WARM and 04:00 (4 hours) will appear
on the display. When WARM time counts down to 00:00 the Slow Cooker will
automatically turn OFF and the display will turn blank.
NOTE:
Press the POWER
button at any time to turn the Programmable Slow Cooker OFF.
11. Press front lid lock, then use the lid knob to lift the hinged Slow Cooker lid.
12. Allow a few seconds for all steam to escape. Inspect and test food for doneness
and adjust seasonings if needed.
13. If cooking is completed before the timer reaches 00:00, press the MODE button
until WARM is illuminated. 04:00 (4 hours) will appear on the display. Continue to
press the UP or DOWN arrows until the target WARM TIME is displayed.
14. Slow cooked food can be served directly from the aluminum pot, if desired.
NOTE:
When serving from the Programmable Slow Cooker, always place a trivet
or protective padding under the slow cooker body before placing it on a table
or countertop.
TO PROGRAM YOUR SLOW COOKER
1. The chart below: Temperatures & Times (Figure 7), lists LOW, HIGH or WARM
temperatures and corresponding default cooking times.
Press MODE Button
Temp
Default Time
1 time
HIGH
4:00
2 times
LOW
8:00
3 times
WARM
4:00
Figure 7
2. Plug cord into a 120V AC outlet. An audible beep will sound; the blue backlit
screen will illuminate; all numbers and icons on the screen begin to flash. After 60
seconds of inactivity, the slow cooker will turn OFF.
3. Press the POWER button. The default screen (4:00 hours, HIGH) will begin to flash.
(See Figure 8A ).
8
