Intégration Guide_iUC150&iUC180
48/70
Copyright © 2012 Ingenico
900009816 R11 000 01/1223
All rights reserved
3.1.4 TELIUM MANAGER on iUC180 only
The main functions offered by the manager are the following:
•
Application management
•
Terminal initialization
•
Terminal maintenance
•
Card Recognition and routing to the applications
When the EMV DC module is present, it selects the applications:
•
EMV applications (EMV level 2 compliant)
•
Non-EMV applications
In France, it is compatible with the following environments
•
Health system
•
French banking system
•
"Private applications"
Terminal initialization
Required operating conditions
For iUC150:
To operate, the system unit has to be equipped with its system and the application
manager.
For iUC180:
To operate, the system unit has to be equipped with its system, the application
manager, the UCMC and at least one application.
If no application is initialized, the application manager displays a message requesting
initialization for an application (in maintenance mode).
If at least one application is initialized, the terminal is operational. The application
manager then waits for an event to poll the applications loaded in the terminal.
Initialisation of common parameters (iUC180 in maintenance mode)
The application manager is used to initialize the common parameters:
Date, time, message display language, IP network configuration data, local loading or
remote diagnostics.
System unit maintenance (iUC180 in maintenance mode)
The system unit has maintenance functions.
•
Properties
•
Local downloading
•
Diagnostics
