IPP200 Series INSTALLATION GUIDE
296108772AD
900001778 R11 000 06 /0111
INGENICO – 192 avenue Charles de Gaulle – 92200 Neuilly sur Seine – France
Copyright © 2011 Ingenico
Tél. 33(0)1 46 25 82 00 - Fax 33 (0)1 47 72 56 95
Terminal location:
The IPP2oo Series must be positioned to keep the cardholder PIN (Personal Identification
Number) entry confidential.
Keypad
Reading contactless cards
Physical characteristics:
Weight (without cable)
145 g
Dimensions
132 x 74 x 37 mm (lxWxH)
Cable
removable
Operating conditions:
Temperature
+5°C to +40°C
Maximum relative humidity 85% RH at +40°C
Storage conditions:
Temperature
-20°C to +55°C
Maximum relative humidity 85% RH at +55°C
Maximum consumption:
400mA at +5V, 300mA at rate voltage range +8V to +14V
Power Supply Voltage is a SELV circuits (Safety Extra Low Voltage according to safety
standard IEC 60950-1)
The power supply has to be in compliance with §2.5 (Limited power source) of the
standard IEC 60950-1
Cabling
:
Proceed as follow to disconnect the cable from the terminal:
To connect the cable, proceed in reverse order.
1
Remove the cable flap by clamping the
slot as indicated by the arrows
2
Press the locking device
3
Remove the connector
Validation key
Correction key
Cancellation key
Function keys
Installing the PINshield (optional)
