Ingenico ELITE 790, User Manual

Page: 16 / 32

ELITE 790 Terminal
16
2- Telephone Network Parameters
Regarding the following points, if the value already present in the terminal is correct, it will be
validated without entering a new one.
N° DISPLAY ACTION
1
PRESENT CARD
01/08/01 18 :32
Press the
2
key and select the function using
3
or
4
keys or the navigation wheel. Select
“System Menu”.
2
SYSTEM MENU
TELECOM
Press the
A
key.
3
SWBOARD =
(up to 4 char)
If necessary, enter the number of the
switchboard to connect the terminal to the
switch network. A pause could be inserted using
2
key. Cancel the value with the
B
key when
using a direct line. Press the
A
key.
4
PAD DOWNLD .X25 =
08 36 06 24 24
(up to 12 char)
The current value is displayed.
Enter another host number if necessary.
Press the
A
key.
5
ONLY V22 ?
1= YES / 0=NO : 0
The current value is displayed.
If necessary, enter 1 if you want to work in V22
(1200 bauds) mode rather than V22 bis (2400
bauds).
Press the
A
key.
6 DIAL DURATION :
20 - 199s : 40
The current value of the carrier detection timeout
is displayed. If necessary, enter the correct
value.
Press the
A
key.
7 BELL 212A ?
1= YES / 0=NO : 0
The current value is displayed.
1 = detects 2225 Hz Answer tone Bell
0 = detects 2100 Hz Answer tone CCITT (V22,
V22bis).
Press the
A
key.
8 PRESENT CARD
01/08/01 18 :32