October 2001
13
2- Telephone
Network
Parameters
If the value already present in the terminal is correct, it does not need to be re-entered.
.
N° DISPLAY
ACTION
1
SYSTEM MENU
TELECOM
Press the
key.
2
SWBOARD =
(up to 4 char)
If the Elite 790 is connected to a PBX or key
system it may be necessary to enter a code to
access an outside line. Enter that number
here. If a pause is required use the
key. If
you want to delete your entry use the
key. If this feature is not required press the
key.
3
PAD DOWNLD .X25 =
08 36 06 24 24
(up to 12 char)
The current value is displayed.
Enter another host number if necessary.
Press the
key.
4
ONLY V22 ?
1= YES / 0=NO : 0
The current value is displayed.
If you need to restrict the speed of the modem
to 1200 baud (Bell 212A) only set the value to
1. If you want the modem to start at 2400
baud (V22bis) and negotiate with the host
select 0.
Press the
key.
5 DIAL DURATION :
20 - 199s : 40
The current value of the carrier detection
timeout is displayed. If necessary, enter a
new value.
Press the
key.
6 BELL 212A ?
1= YES / 0=NO : 0
The current value is displayed.
1 = detects 2225 Hz Answer tone for North
America
This value should always be 1
Press the
key.
