EFT930 Wireless Series
•
8/36
Copyright © 2009 Ingenico
9000001568 R11 000 02/941
All rights reserved
3.3.
Switching off the terminal
If the battery is empty and the terminal in use is removed from its base, the terminal
automatically shuts off.
It may also be forced stopped by pressing simultaneously
and
(yellow key)
for one second.
In order to restart the terminal, press
on the keyboard. For EFT930 colour and
contactless terminals, press
on the keyboard until : -) appears on the screen.
3.4.
Installing the terminal on the base
Connecting the terminal on the base
Place the EFT930 between the flanges on its base so that the contacts of the EFT930
engage on the contacts provided on the base (see picture below).
Using the modem base
Once installed, the base modem is designed to always be plugged into the mains network
and be connected to a telephone line. The telephone line should not be shared.
The portable may be placed back on its base after each transaction.
It
must
be placed on its base in the following cases :
•
When telephone network is used for : authorization request, remote collection,
downloading, check processing (If the base is connected to a check reader).
