END OF DAY REPORTS
To access the reports menu press the
Menu
key twice, then “REPORTS”.
Enter the Supervisor password and press green key.
END OF DAY
: One touch function that prints both the “Z REPORT” and
the “BANKING” report. This
MUST
be done at the end of each day that
you trade.
BANKING
: Indicates total value of transactions that have been
processed and shows that the totals have been confirmed by the
acquirer.
X REPORT
: Shows the breakdown of transactions in different ways
enabling you to check off against individual receipts and the
“BANKING” report.
Z REPORT
: Exactly the same as the “X REPORT”, except that the “Z
REPORT” resets the totals ready for the next day’s trade.
CHANGING THE PAPER ROLL
Hold the terminal securely in one hand. With the other hand, and by using two fingers, lift the
printer cover release as shown. Fully open the printer cover and remove the old roll of paper.
Unstick the end of the new roll, leaving the end free, hold the paper roll and carefully place into
the printer compartment.
Holding the free end of the paper and the terminal, close the printer cover and push it firmly until
it locks. While your terminal is displaying the idle screen, press and hold the paper feed key to
ensure that the paper feeds correctly.
ONLY OPEN THE PRINTER
COVER
AS SHOWN - DO NOT FORCE THE PRINTER COVER
