Clear key
Cancel key
Menu key
Enter key
Dot key
Quick Start Guide
Desk/3500
GETTING STARTED
Set up your Desk/3500 in a convenient location close to a
power source and an Ethernet socket or telephone socket.
To connect an Ethernet cable, connect one side to your
Ethernet output or router and the other side to the ‘ETH’ socket
on the Magic box.
Finally, connect the power supply unit into the power socket on
your Magic box and to the mains power. After a short
initialisation process, the terminal will display READY or an
idle logo.
SUPERVISOR PASSWORD
The default supervisor password is
999999
.
Please note
: The
terminal will require you to change this to a new code of your
choosing before you can process any transactions.
FUNCTION KEYS
Function Keys
: These appear on the screen interface where
they may be used as shortcuts, such as F1 to print a
contactless receipt or F4 to access a sale menu.
Menu key
: To enter the application menus press the
Menu
key from the idle (READY) screen. Pressing the
Menu
key
again moves to the next menu (if available).
Correction keys
: When entering numbers or letters,
the
yellow
‘Clear’ key deletes one character at a time; while the
red
‘Cancel’ key deletes the entire line (this key also cancels
transactions).
Confirmation key
: The
green
‘Enter’ key is used to confirm
anything that has been typed into the terminal.
Note
: Press and hold the yellow key and the dot key together
to turn the terminal off.
Power In
Ethernet
