background image

AMON SE  OWNER’S Manual – 

11

10

ENGLISH

ENGLISH

 

■ 

WARRANTY

[ANALOG SECTION]

Mic Input

 

Input Type

Low Noise Microphone Preamp

Connector Type

XLR (1:Ground, 2:Hot, 3:Cold)

Total Preamp Gain

 +42dB Approx

Input Impedance

1.5 k ohms(nominal)

Frequency Response

TBD

SNR(Min Gain)

>93dB(A)

THD+N

<0.004% @ 1kHz, -1dBFS, Minimum Gain

Maximum Input Level

 -6dBu, Minimum Gain

Phantom Power

 +48V, +/-3%, no load, 10mA max

Line Output

type

Stereo Unbalanced Line Amplifier

Connector type

1/4" TS Phone

Maximum Output Level

 +1dBV @ 0dBFS

Frequency Response

TBD

SNR

TBD

THD+N                       

>0.003% @ 1kHz

Output Impedance         

<100 ohms

Headphone Output

type

Stereo HP Amplifier

Connector type

1/4" TRS Phone

Maximum Output Level

 +7dBV @ 0dBFS

Frequency Response

TBD

SNR

TBD

THD+N

>0.003% @ 1kHz

Power@33ohms Load

200mW

[DIGITAL SECTION]

A/D Converter

 

SNR

102dBA@48kHz

THD

92dB@48kHz

D/A Converter

 

SNR

106dBA@48kHz

THD

90dB@48kHz

SPDIF Output

 

Type

Standard SPDIF Coaxial Driver

Connector Type

Coaxial

SAMPLE RATE SUPPORTS

44.1, 48kHz

6. Specifications

Trademarks

INFRASONIC and AMON SE are registered trademark of SAMICK MUSICAL INSTRUMENTS CO., LTD.

Windows is a trademark of Microsoft Corporation. Other product and brand names are trademarks or registered trademarks 
of their respective companies.

End User Warranty

SAMICK MUSICAL INSTRUMENTS CO., LTD. warrants this product, under normal use, to be free of defects in materials and 
workmanship for a period of One (1) year from date of purchase, so long as: the product is owned by the original purchaser, 
with proof of purchase from an authorized SAMICK MUSICAL INSTRUMENTS CO., LTD. dealer. This warranty explicitly excludes 

power supplies and included cables which may become defective as a result of normal wear and tear.

In the event that SAMICK MUSICAL INSTRUMENTS CO., LTD. receives, from an original purchaser and within the warranty 
coverage period, written notice of defects in materials or workmanship, SAMICK MUSICAL INSTRUMENTS CO., LTD. will 
either replace the product, repair the product, or refund the purchase at its option. To obtain warranty service, the original 
purchaser or his authorized dealer must fill the support contact form at www.usbband.com. In the event repair is required, 
shipment to and from SAMICK MUSICAL INSTRUMENTS CO., LTD. and possible handling charges shall be borne by the 
purchaser. SAMICK MUSICAL INSTRUMENTS CO., LTD. will not accept returns without prepaid shipments. In the event that 
repair is required, a Return Authorization Number must be obtained from SAMICK MUSICAL INSTRUMENTS CO., LTD. After 
this number is obtained, the unit should be shipped back to SAMICK MUSICAL INSTRUMENTS CO., LTD. in a protective package 
with a description of the problem and the Return Authorization Number clearly written on the package. All such returns must 
be shipped to SAMICK MUSICAL INSTRUMENTS CO., LTD. headquarters in Seoul, Korea.

In the event that SAMICK MUSICAL INSTRUMENTS CO., LTD. determines that the product requires repair because of user 
misuse or regular wear, it will assess a fair repair or replacement fee. The customer will have the option to pay this fee and 

have the unit repaired and returned, or not pay this fee and have the unit returned and un-repaired.

The remedy for breach of this warranty shall not include any other damages. SAMICK MUSICAL INSTRUMENTS CO., LTD. will 

not be liable for consequential, special, indirect, or similar damages or claims including loss of profit or any other commercial 
damage, even if its agents have been advised of the possibility of such damages, and in no event will SAMICK MUSICAL 

INSTRUMENTS CO., LTD.’ liability for any damages to the purchaser or any other person exceed the price paid for the product., 
regardless of any form of the claim. SAMICK MUSICAL INSTRUMENTS CO., LTD. specifically disclaims all other warranties, 
expressed or implied. Specifically, SAMICK MUSICAL INSTRUMENTS CO., LTD. makes no warranty that the product is fit for any 

particular purpose.

Correspondence

For technical support inquiries, contact your nearest dealer, local SAMICK MUSICAL INSTRUMENTS CO., LTD. distributor or 
SAMICK MUSICAL INSTRUMENTS CO., LTD. directly at:

SAMICK MUSICAL INSTRUMENTS CO., LTD.
Head Offce. 1-6, Soi-ro, Soi-myeon, Eumseong-gun, Chungbuk, KOREA
Seoul Offce. 5 8-3, Nonhyeon-dong, Gangnam-gu, Seoul, KOREA

www.infra-sonic.com
www.simsaudio.com
[email protected]

Summary of Contents for Amon SE









Reviews: