manualshive.com logo in svg

infrared industries FGA, Operator'S Manual, Page: 13 / 58

Share
Download
infrared industries FGA Operator'S Manual Download Page 13

 

12 

Chapter 1 – 

Configuring the Analyzer 

 
The FGA4000XDS has various configuration options that can be set by the operator.  This chapter describes each of 
these options. 
To enter the configuration options press the MODE button when the analyzer is in stand-by mode.  Each time 
the MODE button is pressed the display will advance to the next option.  At any time you can exit the 

configuration and return the analyzer to stand-by mode by pressing MODE EXIT button. 
 

D A T A   C A P T U R E   O P T I O N :  

The analyzer has the ability to store data.  If there is currently data stored in the 
analyzer the following display will appear.  If you want to erase the data use the 

▲ and ▼ buttons to select between yes and no.  After you have made your 
selection, press MODE or MODE EXIT.  If yes was selected the stored data 

will be erased.  If no was selected the data will remain and any further data 
capturing that is done will be appended to the end of the stored data. 

 

The next display to appear lets you select whether or not to record data.  Use the 

▲ and ▼ buttons to select between yes and no.  If yes is selected then when the 
analyzer is placed in Measure Mode the data will be displayed and captured into 

memory.  When Measure Mode is exited the recording will stop.  Each time 
Measure Mode is entered the data will be appended to the end of the stored data.  

Each time the analyzer is powered-up the default setting for this option is no. 

 

L O W E R   L E F T   W I N D O W :  

Use the ▲ and ▼ buttons to move between the choices.  As a choice is selected 
the symbol will flash next to the window.  You can select between displaying 

NOx, AFR (Air Fuel Ratio) and RPM (TACH).  To move between the two lower 
windows use ◄ and ►buttons.  When you have finished the selections you can 

exit the setup mode by pressing MODE EXIT or go to the next setup item by 
pressing MODE. 

 

L O W E R   R I G H T   W I N D O W :  

Use the ▲ and ▼ buttons to move between the choices.  As a choice is selected 

the symbol will flash next to the window.  You can select between displaying 
RPM (TACH), λ (Lambda) and AFR (Air Fuel Ration).  To move between the 

two lower windows use ◄ and ► buttons.  When you have finished the 
selections you can exit the setup mode by pressing MODE EXIT or go to the 

next setup item by pressing MODE. 

 

S P E E D   O P T I O N :  

This option allows the response speed of the analyzer to be adjusted.  For a BAR 
certified system the analyzer should NOT be run in fast mode.  Use ▲ or ▼ to 

select between yes and no. 

 

ErA 

SE 

 

 

dA 

tA 

 

 

 

no 

 

 

 

rEc  ord 

 

 

dA 

tA 

 

 

 

no 

 

 

 

SEL  ECT 

 

 

DISP  LAY 

 

NOx 
AFR 

kRPM 

 

 



 

 

SEL  Ect 

 

 

dISP  LAy 

 

AFR 

 

 

kRPM 



AFR 

 

 

FAST  MODE 

 

 

 

 

 

 

 

no 

 

 

Summary of Contents for FGA



























































Reviews:

No comments