Appendix 1: Command Mode Support
Use the command mode to set up the Ethernet Converter, it needs an
application software to handle these actions.
Command ‘X’ for Broadcast
‘X’ or ‘x’ Command
Syntax : ‘X’<magic code>
‧
Magic code = 99.130.83.99
Return : ‘AX’<MAC Address>’/’<IP Address>’/’<Device ID>
Example :
‧
Send out: ‘X 99.130.83.99’
‧
Return :
‘AX0.128.200.255.251.242/192.168.1.100/ABC’
Command ‘G’ for getting Status
‘G’ or ‘g’ Command
Purpose: Get the all parameters of the Web Server
Syntax: ‘G’<MAC address>’/’<IP>’/’<Setup Password>
Return : All parameters of the Web Server
Example:
‧
Send out: ‘G
0.128.200.255.251.242/192.168.1.100/12345678’
‧
Return: ’CG’ for Cancel or ‘AG’<All Messages>
Command ‘S’ for Web Server Parameters Setting
‘S’ or ‘s’ Command
Purpose: Set the Parameters of the Web Server
Syntax: ‘S’<MAC Address>’/’<IP>’/’<Setup Password>’/’<Parameter>’/’<Value>
Return: ‘A’ for Accept or ‘C’ for cancel
Example:
‧
Send Out: S
Command ‘R’ for restart
‘R’ or ‘r’ Command
Purpose: Restart the Web Server
Syntax: ‘R’<MAC address>’/’<IP>’/’<Setup Password>
Return: ‘AR’ for accept or ‘CR’ for cancel
Example:
‧
Send out :
‘R 0.128.200.255.251.242/192.168.1.100/12345678
’
‧
Return : ‘AR’ or ‘CR’
25