LL1000V® Tag Printer Copyright © 2003-20016 InfoSight Corporation All Rights Reserved
Page 5
LOADING NEW METAL TAGS
Loading a new roll of tags is as easy as mounting the new roll on the payoff reel so that it unwinds from the
bottom, and hand-feeding the leading edge of the tag stock into the rear feed slot. The marking side of the
tag stock should be facing UP. Gently push it into the slot until it stops against the internal (rear drive)
roller. The printer will then automatically draw the tag stock into the printer.
If necessary, tag stock can be manually fed into the printer by pressing the FEED button located beside the
large red E-STOP button.
CAUTION
: DO NOT GRIP THE TAG STOCK BY ITS EDGES WHEN FEEDING
INTO THE PRINTER. PROTECT YOUR HANDS AND FINGERS FROM THE
SHARP EDGES OF THIN METAL TAG STOCK AT ALL TIMES.
Tag Reel
Keeper Bar
Reminder -
The marker is not ready for use and will not feed tags until the E-STOP
button is returned to the OUT position by twisting the red button one-quarter turn
CLOCKWISE.
Feed Button Operation:
Press & Release Quickly = feed one tag-length OUT (forward).
Press & Hold for 1 Second = feed one tag-length IN (reverse).
Press & Hold for longer than 2 Seconds = CONTINUOUS REVERSE FEED.
