26
6.6 Output Signal Level and Continuous Pulse Width
1. The FV105 code reader provides two specifications of output level signal settings. If
"24V pull-up" is set to on, the output signal level is 24V
。
2.IO output logic, OUT1-OUT2 output level signals are all 24V.
3. The default IO output logic, OUT1 is read success, OUT2 is read failure, the output
level signal pulse width of read success and read failure are both 50ms, the signal pulse
width can be set according to needs, the maximum can be set to 10000ms, After setting,
click "Download Configuration" as needed.