2-6
Chapter 2: Hardware installation
3. Insert the assembled hard drive and tray to the enclosure with the spring handle open, then close
the spring handle after the drive is fully inserted to the bay.
WARNING!
Ensure that your system has all the drive bays occupied with the drive trays even if there
are no hard drives installed. Without the drive trays, the ventilation is compromised and may cause
overheating.
Once all drives are installed, the system recognizes the disk drives and scans them automatically when
powered on.
2. Orient and place the hard drive to the tray with the interface connectors facing the open side of the
tray and the drive label is facing up (A), then secure the drive with four screws (B).
