2-3
EonStor GSa 5000 Series Hardware Manual
Preparing the user-provided tools
Before assembling the slide rail kit, you must prepare the following tools:
•
1 x Medium-sized Phillips screwdriver
•
1 x Small-sized Phillips screwdriver
•
1 x Medium-sized flat blade screwdriver
Slide rail kit contents
Check your slide rail kit for the following contents.
1 x Mounting bracket
assembly, left side
1 x Mounting bracket
assembly, right side
11
11
11
11
11
8 x 9.0 mm M5 Truss
head screws
11
11
11
4 x M5 cage nuts
4 x 25 mm M5 screws
4 x 25 mm M6 screws
4 x 25.4 mm No. 10-32
screws
2 x Inner glides
11
6 x No 6-32 L4 Flathead
screws
2.2.2 Installing the slide rail kit
This section details the overview of the slide rail kit, its assembly, and installation with the storage
system.
IMPORTANT!
Please contact our technical support team if you need further help in installing your
system/enclosure to the rack.
NOTE:
You can also watch this YouTube video on assembling the rackmount kit and installing the
system to the rackmount.
