EonStor / EonStor DS S12/S16/S24 Series
0
Introduction
8
Product Overview
This manual introduces 2U, 3U and 4U RAID/JBOD system that support 3Gbps,
6Gbps SAS or 3Gbps (SATA-II) and 6Gbps (SATA-III) drive interfaces. The 2U/ 3U/
4U enclosure is designed to utilize 3.5” hard drives. Drive capacity can be expanded
by attaching expansion hard drive enclosures (JBODs).
58
Model Naming Conventions
The naming rules for RAID and JBOD models are explained in the example below:
RAID: SxxF-Rxxxx
S
(A)
+ xx
(B)
+ F
(C)
+ R
(D)
+ xxxx
(F)
+ (
N
)
JBOD: SxxS-JxxxxR
S
(A)
+ xx
(B)
+ S
(C)
+ J
(E)
+ xxxx
(F)
+ R
(D)
+ (
N
)
Designation
Description
(A)
Drive-side interface: S = SAS-2 / SATA-II / SATA-III
(B)
Number of hard drive bays: 12/ 16/ 24
©
Host-side interface:
F
= Fibre or hybrid Fibre/ iSCSI
E
= iSCSI
S
= SAS or hybrid SAS/ iSCSI
(D)
Number of controllers:
R
= redundant (dual)
S
= single and upgradeable to dual controller
G
= single and
NOT
upgradeable to dual controller
(E)
“J” stands for JBOD.
(F)
Model number
N
Indicates the system uses DC power supply units
14
