Infortrend EonStor CS 3016, Installation Manual

Page: 36 / 86

EonStor CS Installation Guide
page 36 / 86
Installation Guide
3. Cluster Deployment
In This Section
After cluster network connection is established, this section outline the process for assigning one of the CS
as the master node and using the Cluster Deployer tool to create the CS cluster.
IMPORTANT!
Before you set up a cluster, ensure again that the following steps are met:

Hard drives are installed in all drive slots of the systems.

All systems are turned on.

All node devices are connected to the network switches via network cables.
Contents
3.1. Assign the Master Node
Before deploy the CS cluster, one of the CS must be assigned as master node.
3.2. Cluster Deployer
Outline the process for deploying CS cluster with Infortrend Cluster Deployer.