Multitron Standard - Operating Manual
Accessories
17 March 2021
Page
33
of
114
4.1.2
Pre-Fitted Trays
Pre-fitted trays are equipped with one clamp type each. They are
used if only a single size of flask is to be used for certain tasks. Unlike
the universal table tray, their holders cannot be changed.
Pre-fitted trays feature a capacity that is up to 20 % higher than an
individually equipped universal table tray. Since no drill holes have to
be taken into account in the grid, the clamps can be installed closer
together.
The following versions are available:
Tray with steel clamps
Tray with pin holders for microtitre and deep-well plates
Tray with clamps for microtitre and deep-well plates
Tray with sliding bars
Tray with Sticky Stuff
