Multitron Pro - Incubation Shaker
Transport, packaging and storage
Page
82
of
185
2013-02-19
Transport of palettes with fork lift.
Fig. 56
Packing pieces which are mounted on palettes can be moved by a
fork lift in the following circumstances:
The fork lift must be of appropriate design for the weight of the
unit to be transported.
The driver must be qualified for driving the fork lift.
To hook on:
1.
Drive the fork lift with its forks between or under the palette’s
bars.
2.
Move the forks so that they stand out on the opposite side.
3.
Ensure that the palette cannot tilt because of an eccentric
balance point.
4.
Lift the packed item and start to transport it.
5.5 Storage of the incubator shaker
The unit must be stored as follows:
Do not store outdoors.
Do not expose to aggressive substances.
Do not expose to sunlight.
Avoid mechanical vibrations and shocks.
If stored for more than 3 months, make regular checks of the
general condition of the unit and its packaging. If necessary,
refresh or renew the conservation.
Always decontaminate and clean the unit before putting it into
storage (see chapter "Maintenance").
Store the unit in a clean and dry place that is protected against
dust, dirt and all kinds of liquids
Store the unit in a cool place, not exposed to frost, and with a
low humidity.
Storage temperature: 15 to 35 °C
Relative humidity: max. 60% rH
