Multitron Pro - Incubation Shaker
Setup and function
Page
78
of
185
2013-02-19
4.17 Option Adjustable counterweight
The unit is equipped with a variable throw.
Fig. 52
The eccentric displacement of the axle allows the eccentric throw
to be set to three positions:
12.5 mm
25 mm
50 mm
The counterweights are also adjustable to reduce vibrations during
operation.
If the tray weight is more than 12 kg (loaded, including holders)
and at higher speeds, the counterweights can be set to the position
HL (heavy load).
The positions for mounting the two weights are marked:
Throw 12.5 / HL 25
Throw 25 / HL 50
Throw 50
Fig. 53
Underneath the table, there is a prop on the left-hand tray ejector.
It is used to secure the table in the highest position while the
counterweights are being fitted. The prop is hung onto the rail on
the underside of the table.
