INFORCE
®
6vx
TM
and 9vx
TM
FLASHLIGHT
USER MANUAL AND WARRANTY
BATTERY REPLACEMENT
Your INFORCE 6vx flashlight comes with (2) high-efficiency 123A Lithium batteries;
the INFORCE 9vx with (3).
To insert the batteries, turn the multi-function tailcap counterclockwise to remove it from
the flashlight body. Insert the batteries into the open handle, negative (–) end first.
Re-thread the multi-function tailcap clockwise onto the flashlight handle.
Notes:
• When replacing batteries, never mix battery type or old and new batteries.
• Batteries can leak and may cause damage to the inside of the light. Remove the
batteries if the flashlight will be stored for more than 2 weeks.
• Flashlight heads are non-removable; any attempt to remove the head will damage
the light and void the warranty.
• The light output of the flashlight will dim over time as your batteries
start to drain. At
some point, batteries that have been depleted substantially will not have enough
energy to sustain a full high power output. At that time, there will be little to no
distinction when attempting to cycle between high and low modes. However, there
will still be enough energy in the batteries to produce useful light for a period of time.
This is not an indication that the batteries have to be changed.
CAUTION:
Lithium batteries can explode or cause burns if recharged, shorted,
disassembled or exposed to water, high temperatures or fire. Please
follow manufacturer’s guidelines for safe storage, use and disposal.
If the light has been submerged, dry the exterior of the light prior to
replacing the batteries. Fresh and salt water will damage internal
electronics and batteries.
Do not use counterfeit or inferior-quality
batteries, as they do not meet safety standards and have been the
cause of personal and property damage. To ensure safety and
performance, the purchase of established brands, such as
Duracell
®
, Energizer
®
or Panasonic
®
is recommended.
4-FUNCTION SWITCH OPERATION
• For
momentary
on mode, press and hold the button for more than 1/2 second;
when the button is released, the light will turn off.
• For
high power
mode, press the button once. If high power is on for more than
2 seconds, the next press of the button will turn the light off.
• For
low power
mode, press the button twice within two seconds.
• For
strobe
mode, two quick clicks of the button when in
high power
,
low power
or
off
mode will activate the
strobe
.
• For
lockout mode
, twist flashlight tailcap one half turn (180 degrees) counterclockwise.
TO DISABLE THE WHITE STROBE FUNCTION
1. Unscrew the tailcap one half revolution to the lockout position.
2. Press and hold the button.
3. While holding the button, tighten the tailcap and then release the button.
4. To reactivate the strobe function, repeat steps 1, 2 and 3.
TO REVERSE THE WHITE LIGHT POWER SEQUENCE
The white light feature has been set to high/low power sequence as a default. To reverse
the order to low/high sequence:
1. Press the button twice to activate the low power setting.
2. Press and hold down the button for approximately 5 seconds. The light will turn
off and then blink three times; the default will change from high/low to low/high
sequence. Release the button.
3. To return the setting to high/low power sequence, return to the low power setting
and repeat step #2.
MAINTENANCE /CLEANING INSTRUCTIONS
Your INFORCE flashlight has been designed to provide maximum performance with
minimum maintenance. Occasionally clean threads with a clean cloth and apply a thin
coat of silicon-based lubricant to the rubber O-ring; see above illustration. Do not use a
petroleum-based lubricant. Should the flashlight become dirty from dust, sand or caked-
on mud, rinse fully assembled light with water and dry with a soft cloth.
NEW PATENT PENDING MULTI-FUNCTION SWITCH
PRODUCT WARRANTY
Emissive Energy Corp. (EEC) warrants our products and accessories to be free of defect in workmanship and materials for the lifetime of the original owner. We will repair or replace the product,
at our discretion, if it is determined by us to be defective. In countries or jurisdictions in which specific restrictions exist on lifetime warranties, EEC provides a 10-year limited warranty. Damage
to the product from misuse, abuse, neglect, use of other than INFORCE brand accessories, disassembly, defective batteries or altering the product from its original state voids the warranty.
Battery power depletion and battery expiration is not covered. This warranty is in addition to and does not affect your statutory rights with respect to faulty goods.
THIS CONSTITUTES EEC’S ENTIRE WARRANTY; WE MAKE NO OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, INCLUDING AND WITHOUT LIMITATION
TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. EXCEPT FOR THE EXPRESS WARRANTY TO REPAIR OR REPLACE THE PRODUCT AS SET FORTH ABOVE, EEC
IS NOT RESPONSIBLE FOR ANY DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR INDIRECT COSTS OR DAMAGES, REGARDLESS OF THE FORM OF ACTION, WHETHER IN
CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF EEC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF, NOR IS EEC LIABLE FOR ANY SUCH COSTS OR
DAMAGES CAUSED BY MISUSE, NEGLIGENCE, MALFUNCTION, ALTERATION OR MODIFICATION OF ANY INFORCE PRODUCTS. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, IN SUCH STATES EEC’S LIABILITY IS LIMITED TO THE FULL EXTENT PERMITTED BY LAW.
©2011 Emissive Energy Corp.
Emissive Energy Corp., 135 Circuit Drive, North Kingstown, RI 02852 USA; Tel: 401-294-2030; Fax: 401-294-2050;
www.inforce-mil.com
INFORCE and EMISSIVE ENERGY are registered trademarks and 6vx and 9vx are trademarks of EMISSIVE ENERGY CORP. The distinctive shapes, styles, packaging
configurations and overall
appearances of all INFORCE flashlights and lighting products are trademarks of EMISSIVE ENERGY CORP. Designed and manufactured under one or more of the following U.S. and International
patents: U.S.: 6,966,677; 7,121,680; 7,153,004; 7,226,183; 7,517,108; 7,652,303; 7,784,963; D526,730; D565,220; D579,201; D596,329; D619,283.
European: 467295-0001; 467295-0002.
Other U.S. and International patents are pending.
Designed and assembled in the U.S.A. of domestic and foreign components. This product qualifies as “American Made” under the Buy America Act.
PI-INF-ZF-6VX/9VX/111807
O-RING
THREADS