INFORCE
®
FLASHLIGHT
USER MANUAL AND WARRANTY
PRODUCT WARRANTY
Emissive Energy Corp. (EEC) warrants our products and accessories to be free of defect in workmanship and materials for the lifetime of the original owner. We will repair or replace the product,
at our discretion, if it is determined by us to be defective. In countries or jurisdictions in which specific restrictions exist on lifetime warranties, EEC provides a 10-year limited warranty. Damage
to the product from misuse, abuse, neglect, use of other than INFORCE brand accessories, disassembly, defective batteries or altering the product from its original state voids the warranty.
Battery power depletion and battery expiration are
not covered. This warranty is in addition to and does not affect your statutory rights with respect to faulty goods.
THIS CONSTITUTES EEC’S ENTIRE WARRANTY; WE MAKE NO OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, INCLUDING AND WITHOUT LIMITATION
TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
EXCEPT FOR THE EXPRESS WARRANTY TO REPAIR OR REPLACE THE PRODUCT AS SET FORTH ABOVE, EEC
IS NOT RESPONSIBLE FOR ANY DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR INDIRECT COSTS OR DAMAGES, REGARDLESS OF THE FORM OF ACTION, WHETHER IN
CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF EEC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF, NOR IS EEC LIABLE FOR ANY SUCH COSTS OR
DAMAGES CAUSED BY MISUSE, NEGLIGENCE, MALFUNCTION, ALTERATION OR MODIFICATION OF ANY INFORCE PRODUCTS. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, IN SUCH STATES EEC’S LIABILITY IS LIMITED TO THE FULL EXTENT PERMITTED BY LAW.
©2014 Emissive Energy Corp.
Emissive Energy Corp., 135 Circuit Drive, North Kingstown, RI
02852 USA; Tel: 401-294-2030; Fax: 401-294-2050;
www.inforce-mil.com
INFORCE and EMISSIVE ENERGY are registered trademarks and
6v
T
is a trademark of EMISSIVE ENERGY CORP. The distinctive shapes, styles, packaging configurations and overall appearances
of all INFORCE flashlights and lighting products are trademarks of EMISSIVE ENERGY CORP. Designed and manufactured under one or more of the following U.S. and International patents: U.S.:
6,966,677; 7,121,680; 7,153,004; 7,226,183; 7,517,108; 7,652,303; 7,784,963; D526,730; D565,220; D579,201; D596,329; D619,283. European: 467295-0001; 467295-0002.
Other U.S. and International patents are pending.
Designed and assembled in the U.S.A. of domestic and foreign components. This product qualifies as “American Made” under the Buy American Act.
O-RING
THREADS
BATTERY REPLACEMENT
Your INFORCE 6v
T
flashlight comes with (2) high-efficiency 123A Lithium batteries.
To insert the batteries, turn the multi-function tailcap counterclockwise to remove it from
the flashlight body. Insert the batteries into the open handle, negative (–) end first.
Re-thread the multi-function tailcap clockwise onto the flashlight handle.
Notes:
• When replacing batteries, never mix battery type or old and new batteries.
• Batteries can leak
and may cause damage to the inside of the light. Remove the
batteries if the flashlight will be stored for more than 2 weeks.
• Flashlight heads are
non-removable; any attempt to remove the head will damage
the light and void the warranty.
CAUTION:
Lithium batteries can explode or cause burns if recharged, shorted,
disassembled or exposed to water, high temperatures or fire. Please
follow manufacturer’s guidelines for safe storage, use and disposal.
If the light has been submerged, dry the exterior of the light prior to
replacing the batteries. Fresh and salt water will damage internal
electronics and batteries.
Do not use counterfeit or inferior-quality
batteries, as they do not meet safety standards and have been the
cause of personal and property damage. To ensure safety and
performance, the purchase of established brands, such as
Duracell
®
, Energizer
®
or Panasonic
®
is recommended.
MAINTENANCE/CLEANING INSTRUCTIONS
Your INFORCE flashlight has been designed to provide maximum performance
with minimum maintenance. Occasionally clean the threads with a clean cloth
and apply a thin coat of silicon-based lubricant to the rubber O-ring; see above
illustration. Do not use a petroleum-based lubricant.
SWITCH OPERATION
1. To engage the Constant On mode, the tailcap switch must be completely
turned clockwise toward the main body tube.
2. From the constant on position, one-half revolution counterclockwise turn
will engage Momentary On. To activate the Momentary On mode, depress
and hold the rubber button end-cap for as long as light is required.
3. One-half counterclockwise turn from the Momentary On mode will lock
the switch in Constant Off mode, rendering the light inoperable and safe
for travel and/or storage.