InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 71 / 128

Set Absolute Horizontal Print Position In 1/60 Inch
71
Set Absolute Horizontal Print Position In 1/60 Inch
ASCII Code ESC $
n1 n2
Hex Code 1B 24 n1 n2
Dec Code 27 36 n1 n2
Purpose Moves the simulated print head to an absolute horizontal print
position using 1/60-inch increments.
Where:
n1
= 0 through 127
n2
= 0 through 255
(
n1
+ (
n2
x 256)) / 60 = the unsigned distance in inches from
the left margin.
Comment If the distance goes beyond the right margin, the sequence is
ignored.
Set Chinese Font Rotate (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T + n
Hex Code ASSC 30 54 2B n
Decimal ASSC 48 84 43 n
Purpose Set rotation as:
n = 0x31: DBCS character in normal (do not rotate, default).
n = 0x32: DBCS character rotate 90 degrees counterclockwise.
n = 0x33: DBCS character rotate 270 degrees
counterclockwise.
n = 0x34: DBCS character rotate 180 degrees.
n = 0x35: ASCII character in normal (do not rotate).
n = 0x36: ASCII character rotate 90 degrees counterclockwise.
n = 0x37: ASCII character rotate 270 degrees
counterclockwise.
n = 0x38: ASCII character rotate 180 degrees.
Where
n = 0x31 ~ 0x39
Comment This control code does not function while in non-DBCS mode.