InfoPrint 6500-v05, User Manual

Page: 237 / 340

Fault Messages
If a fault condition occurs in the printer, the Attention indicator on the operator
panel lights, and the first line of the operator panel message display indicates the
fault. The second line of the display indicates how to clear the fault.
Table 11 on page 222 explains each fault message and describes how to correct the
fault condition. Displayed faults fall into one of two categories:
v
Operator correctable.
v
InfoPrint Solutions Company service representative required to correct.
Fault Correction Procedure
Before correcting a fault, read the fault explanation, then proceed to fix the
problem, taking the following steps:
1. Write down the number of the error message(s) being displayed.
2. Read the fault explanation, then proceed to fix the problem, if possible.
3. Press STOP to clear the fault message. Press START to return to Ready mode,
and resume printing.
4. If the fault message reappears, power off the printer, wait 15 seconds, then
power on the printer.
0 | 1 | 2 | 3 | 4
00000000000000001111111111111111222222222222222233333333333333334
0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0
0 | 1 | 2 | 3 |
4444444444444445555555555555555666666666666666677777777777777778
123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0
âäàáãåçñ¢.<(+|&éêëèíîïìß!$*);¬—/ÂÄÀÁÃÅÇѦ,%_>?ØÉÊËÈÍÎÏÌ':#@'="0
0 | 1 | 2 | 3 |
8888888888888889999999999999999AAAAAAAAAAAAAAAABBBBBBBBBBBBBBBBC
123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0
abcdefghi
!@ åýÞ±°jklmnopqraoæ q Ƥ
µ
~stuvwzyz¡¿ÐÝþ
®
^£¥•©§¶¼½¾[]‾ } '×{
0 | 1 | 2 | 3 |
CCCCCCCCCCCCCCCDDDDDDDDDDDDDDDDEEEEEEEEEEEEEEEEFFFFFFFFFFFFFFFF
123456789ABCDEF0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF
ABCDEFGHI—ôöòóõ}JKLMNOPQR¹ûüùúÿ\÷STUVWXYZ²ôöòóõ0123456789³ûüùú
Figure 71. Sample Twinax Hex Code Printout
Chapter 7. Routine Service and Diagnostics
221