InfoPrint 6500 DBCS, User Manual

Page: 14 / 230

14
Chapter 1
Printer Overview
How To Identify The Printer
The model number of the printer indicates the printer family, rated maximum
print speed, and type of enclosure. (See Figure 1.)
Figure 1. Printer Model Number Interpretation
RibbonMinder
The 6500-D has a new feature that automatically monitors and communicates
ribbon life. Using a specially barcoded spool, the printer can automatically
detect when a new or used ribbon is loaded, and all ribbon properties. With a
sophisticated algorithm, the system monitors all jobs printed and
automatically updates the remaining ribbon life on the front panel display. This
allows the system administrator to have precise control over print quality and
consumable costs. The accurate presentation of available ribbon life allows
for efficient planning of print jobs. For example, you can install a new ribbon
before printing large print jobs.
When the ribbon life gets near the end point, the printer displays a ribbon low
message and flashes the indicator light. Printing will continue without
interruption. Once the ribbon reaches 0% remaining, the alarm sounds, the
indicator light flashes, the display updates, and printing pauses. If a new
ribbon is loaded, the system automatically detects the change, clears the
condition, and restarts the life at 100%. If it is not convenient to change the
ribbon immediately, cycle the printer on and offline and it will resume printing
for a few minutes. This should be enough to complete the job. If not, repeat
the same procedure indefinitely to extend printing on the same ribbon.
InfoPrint 6500-D Printer Family
6500-D3P
Letter Code:
P = Pedestal Model
C = Cabinet Model
Speed Rating:
D3C = 300 LPM
D3P = 300 LPM
D6C = 600 LPM
D8C = 800 LPM