InfoPrint 6500 DBCS, User Manual

Page: 111 / 230

Print Format Menu
111
Ripple Print
A “sliding” alphanumeric pattern used to identify missing or malformed
characters, improper vertical alignment, or vertical compression.
All E’s
A pattern of all uppercase E’s that identifies missing characters, misplaced
dots, smeared characters, improper phasing problems, or light/dark character
variations.
All H’s
A pattern of all uppercase H’s used to detect missing characters, misplaced
dots, smeared characters, or improper phasing.
All E’s + FF
A pattern of all E’s repeated for ten lines and followed by a form feed to the
next page top–of–form, used to identify paper motion or feeding problems,
such as paper path obstruction or improper forms.
Underlines
An underline pattern useful for identifying hammer bank misalignment.
Adapter Test Page
Prints an Ethernet Adapter configuration page. If the Ethernet Adapter is not
properly installed, this page will not print.
NOTE: This page contains important system and ethernet adapter
information and should be maintained with your system configuration
printout.
Your InfoPrint Customer Service Representative will typically run
these tests.
Ethernet Test Page
Prints an Ethernet configuration page. If the Integrated Ethernet is not
properly installed, this page will not print.
NOTE: This page contains important system and ethernet information and
should be maintained with your system configuration printout.
Your InfoPrint Customer Service Representative will typically run
these tests.
Clear Error Log
Clears entries in the error log.
Printer Information Menu