Using Remote Control to control the Device
This section explains how to unpack Remote Control
(RC) and prepare it for work. Remote Control
requires two batteries type AAA, R03, LR03, UM-4, 286.
Important information about using batteries. Do
not mix different types of battery or old and new
batteries. Do not use rechargeable batteries with
the remote control. Remove the batteries from the
remote control if you are not going to use it for
several weeks, to avoid the risk of leakage. Please
respect your environment and any local regulations
and dispose of old batteries in a responsible manner.
Caution! Do not attempt to recharge the
batteries.Immediately remove any leaking
batteries. Take care when handling leaking
batteries as they may cause burns to the
skin or eyes, or other physical injuries.
Manual RС Pairing
1) Press the <<OK + HOME>> on RCU simultaneously
for 3 seconds, the LED blinks to acknowledge.
2) Hold (>2s) the “Standby mode On/Off” button on
the top of the STB to run pairing process.
3) If pairing is successful, LED will provide
a confirmation blink.