Using Remote Control to control the Device
Introduction to the Programmable
Remote Control Unit (optional)
If MAG322, MAG322w1 package includes a remote
control with a block of five programmable buttons
(marked with blue print colour), then you may want to
choose these buttons for controlling other devices
(TV set, amplifier).
To program the buttons do the following:
•
Press the «On/Off» and «A/V» buttons at the same time
and hold it for 2 seconds. When the green light of the
«On/Off» button will stop blinking and willlight steadily,
it means the RC is ready to learn.
•
Press the button you want to «teach» — the green
light will start blinking.
•
Place the infrared lamps of two RCs opposite each
other and press the button on the RC of the other
device, the function of which you wish to copy on device
RC. Hold for 2 seconds.
•
After the green light two quick blinks you may continue
programming other buttons.
•
Repeat the procedure described above for all buttons
you want to program for controlling
external devices.
•
Press the the «On/Off» and «A/V» buttons to save the
programmed data; the green light should fade off.
Reset
Press «SETUP» and «OK» buttons at same time and hold for 2
seconds red LED will flash 5 times. Reset is done.
This section explains how to unpack Remote Control
(RC) and prepare it for work. Your service provider
can supply the product with an alternative RC. In
that case please refer to the manual supplied by
your service provider. Remote Control requires two
batteries type AAA, R03, LR03, UM-4, 286. Important
information about using batteries. Do not mix
different types of battery or old and new batteries.
Do not use rechargeable batteries with the remote
control. Remove the batteries from the remote
control if you are not going to use it for several
weeks, to avoid the risk of leakage. Please respect
your environment and any local regulations and
dispose of old batteries in a responsible manner.
Caution! Do not attempt to recharge the
batteries.Immediately remove any leaking
batteries. Take care when handling leaking
batteries as they may cause burns to the skin
or eyes, or other physical injuries.
