1)
USB HOST/CLIENT AND CELLULAR OPERATION:
UP - USB client – Configuration mode
DOWN - Normal cellular operation
2)
USB IN/OUT:
UP - USB out to connector – Configuration mode
DOWN – USB on board – Cellular streaming video.
The USB client is used for configuring the
device’s parameters using the Device Config
application. Connect the USB cable between
here and a PC when configuring the unit. Dip
switch must be set correct in order to
communicate through usb
Insert a Micro SD card into the Micro SD slot for
recording on the PMRS device.
2-6
USB Client:
2-7
Micro SD Slot:
2-8
5V-12 Power Input:
The 5V-12V power input is located on the side
of the unit.
The PMRS has 2 Dip Switches located on the
side of the unit. The dip switches are for setup
and operation. The functions of each switch are
described below in order from left to right:
2-9 Dip Switches: