35
Language: menu language, Optional items: EN,
Chinese
ColorSys: Set the DVI system, color in the
analog signal, Optional items: YPbPr, RGB
（
Only
effective under 720 p60/1080 p60
）
DVIMode: Set the output signal mode selection
of DVI digital signal, Optional items: HDMI,
DVI(Effect after restart)
Protocol: Control protocol type. Optional items:
VISCA, P-D, P-P
Address: protocol address, To be decided
according to the agreement, can be set up under the
VISCA items: 1 ~ 7, P - P and P- D can be set up: 0 ~
254
AddrFix: If I can change through the serial port
of infrared switch, Optional items: On, Off (When set
to On, cannot address via a serial port to modify the
camera)
Baudrate: Serial port baud rate. Optional items:
2400, 4800, 9600
8. RESTORE DEFAULT
Move the cursor to the Restore Default item in
the main menu and press [HOME] button, RESTORE
DEFAULT menu appears, as shown in the following
figure.
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
SETUP
Language
EN
ColorSys
YPbPr
DVIMode
DVI
Protocol VISCA
Address
1
AddrFix
Off
Baudrate
9600
Select Item
Change Value
[Menu] Back
