5
3
Remove the lamp door by unscrewing the thumbscrew then sliding the
door to the right and off.
4
Remove the lamp module by unscrewing the 2 thumbscrews then pull-
ing the bail wire. Dispose of the lamp in an environmentally proper
manner.
5
Install the new lamp module, making sure that it is properly seated. Be
careful not to touch the interior components of the projector.
6
Snap the bail wire back into its flat position against the lamp module.
7
Replace the lamp door and cable cover.
loosen thumbscrew on lamp door
and slide door to the right
loosen 2 thumbscrews and remove
module using bail wire
