Lamp Module Replacement Instructions:
SP-LAMP-090
6. Loosen the two (2) captive screws that attach the
lamp module to the projector.
7. Carefully remove the lamp module.
Dispose of the
lamp in an environmentally proper manner.
8. Reverse steps 1 – 7 to install the new lamp module.
While installing, align the lamp module with the
connector and ensure it is level to avoid damage.
Note:
The lamp module must sit securely in place
and the lamp connector must be connected properly
before tightening the screws.
9. Plug in the power cord and press the
Power
button
to turn on the projector.
10. To reset the lamp hour timer:
a. Navigate
to
the
Settings 2 >> Advanced 1
menu using the projector keypad or remote.
b. Highlight
Lamp Hour Reset
and press the
Enter
or
(right) arrow button.
c.
Press the following arrow buttons in sequence
to reset the lamp timer:
(Down, Up,
Left, Right).
d. Press
the
Menu
button to return to the
Settings 2
menu.
