background image

39

Limited Warranty

Subject to the Limitations, Exclusions and Disclaimers hereof, InFocus Cor-
poration (“InFocus”) warrants that the Projector, Lamps and Accessories 
(hereinafter collectively or individually referred to as “Product” as appro-
priate) purchased from InFocus, an InFocus distributor, or an InFocus 
reseller will conform to InFocus’ specifications and be free from defects in 
material or workmanship for the respective Limited Warranty period pro-
vided below. InFocus does not warrant that the Product will meet the spe-
cific requirements of the end-user customer.
If the Product while subject to this Limited Warranty, is defective in material 
or workmanship during the warranty period, then InFocus, at its option, 
will REPAIR or REPLACE the Product.
All exchanged parts and Products replaced under this Limited Warranty 
will become property of InFocus. InFocus' sole obligation is to supply (or 
pay for) all labor necessary to repair the Product found to be defective 
within the Limited Warranty period and to repair or replace defective parts 
with new parts or, at the option of InFocus, serviceable used parts that are 
equivalent or superior to new parts performance. Limited Warranty periods 
are as follows: 

Projector Product Limited Warranty Period (Excluding Lamps)

Two (2) years

 from date of purchase. 

Lamp Product Limited Warranty Periods:

 From the date of Projector 

Product purchase, the original installed lamp shall have a 90-day or 500 
hours usage Limited Warranty Period, whichever comes first.
Replacement Lamps purchased at the time of Projector Product pur-
chase will have a 90-day or 500 hours usage Limited Warranty Period 
from the date of installation, whichever comes first.
Replacement lamps purchased after the time of Projector Product pur-
chase shall have a 90-day or 500 hours usage Limited Warranty Period 
from the date of replacement lamp purchase, whichever comes first. 

Accessory Product Limited Warranty Period: one (1) year

 from date 

of purchase. 

WARRANTY LIMITATION AND EXCLUSION

THIS WARRANTY SETS FORTH INFOCUS’ MAXIMUM LIABILITY FOR 
ITS PRODUCT. THIS WARRANTY EXTENDS ONLY TO PRODUCTS PUR-
CHASED FROM INFOCUS OR AN INFOCUS AUTHORIZED RESELLER. 
InFocus shall have no further obligation under the foregoing Limited War-
ranty if the Product has been damaged due to abuse, misuse, neglect, smoke 
exposure (cigarette or otherwise), accident, unusual physical or electrical 
stress, unauthorized modifications (including use of an unauthorized 
mount), tampering, alterations, or service other than by InFocus or its 
authorized agents, causes other than from ordinary use or failure to prop-
erly use the Product in the application for which said Product was intended.
This Limited Warranty excludes Product cleaning, repair, or replacement of 
plastics due to cosmetic damage and damage as a result of normal wear. 
Product repair outside of the terms of the Limited Warranty will be on a 
time and materials basis. Prolonged Product “demonstration” causes 
unusual Product wear and is not considered normal use under the terms of 
this Limited Warranty.
The Accessory Product Limited Warranty covers the accessory item only 
and excludes normal wear. The Lamp Product Limited Warranty excludes 
expected lamp degradation.
Remanufactured Products and Software Products are exempt from the fore-
going Limited Warranty. Please refer to the appropriate Remanufactured 
Product Limited Warranty or Software Product Limited Warranty for appli-
cable Warranty information.

DISCLAIMER OF UNSTATED WARRANTIES

THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLI-
CABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR 
PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES THAT 
EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF AND 
THE FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED 
OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY INFOCUS. 
SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW 
LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS 
MAY NOT APPLY TO YOU.

Summary of Contents for ScreenPlay 5000











































Reviews: