27
Controls Menu
F
IGURE
17
Controls menu
Video Standard
NOTE:
If you already know the
video standard used in your geo-
graphical area, it’s often best to
manually select it.
When Video standard is set to Auto, the projector attempts to
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,
PAL-60, or SECAM) automatically based on the input signal it
receives. (The video standard options may vary depending on
your region of the world.) If the projector is unable to detect the
correct standard, the colors might not look right or the image
might appear “torn.” If this happens, manually select a standard
by clicking the left or right mouse button and cycling through the
standards.
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when the projector enters standby
mode before the projector turns off. Select among instant, 1, 5, 10,
15 and 30 minutes and 1 and 2 hours by clicking the left or right
mouse button and cycling through the options.
Ceiling Projection
When you turn
Ceiling Projection
on, the projector turns the
image upside down for ceiling-mounted projection. Highlight
Ceiling Projection, then click the left or right mouse button to
turn this feature on and off.
Display Audio Image Controls Language Status
>
>
Video standard
Standby time
1 minute
Ceiling projection
off
Rear projection
off
Default source
computer 1 analog
Auto source select
off
Plug and Play
off
Display messages
on
Display startup screen on
Summary of Contents for LP340
Page 12: ...6 I n t r o d u c t i o n ...
