InFocus LP 750 LiteMount Installation Manual Download Page 13

11

Limited Warranty

In Focus Inc. warrants that each “ceiling mount” sold hereunder will 
conform to and function in accordance with the written specifications 
of In Focus. Said limited warranty shall apply only to the first person 
or entity that purchases the Product for personal or business use and 
not for the purpose of distribution or resale. The product may contain 
recycled components that are in new condition. Said warranty shall 
continue for a period of one (1) year from the date of such purchase. 

Proof of purchase is required for all warranty claims. 

In Focus does 

not warrant that the Product will meet the specific requirements of the 
first person or entity that purchases the Product for personal or busi-
ness use. In Focus’ liability for the breach of the foregoing limited war-
ranty is limited to the repair or replacement of the Product or refund 
of the purchase price of the Product, at In Focus’ sole option. To exer-
cise the Purchaser’s rights under the foregoing warranty, the Product 
must be returned at the Purchaser’s sole cost and expense, to In Focus, 
and must be protected by packaging comparable to the original pack-
aging. The Product must be accompanied by a written letter that 
includes (i) proof of date of purchase, (ii) the dealer’s name, (iii) the 
part number of the accessory item or the projector/panel model num-
ber, (iv) your business card information, (v) explanation of how the 
item was damaged, and (vi) description of the damage and reason for 
the return. Please call In Focus or your dealer for information on 
where to send your case. In Focus will repair/replace and return the 
case within 10 days of receipt of the item.

Warranty Limitation and Exclusion

In Focus shall have no further obligation under the foregoing limited 
warranty if the Product has been damaged due to abuse, misuse, 
neglect, accident, unusual physical stress, unauthorized modifica-
tions, tampering, alterations, or service other than by In Focus, causes 
other than from ordinary use or failure to properly use the Product in 
the application for which said Product is intended.

Disclaimer of Unstated Warranties

The warranty printed above is the only warranty applicable to this 
purchase. All other warranties, express or implied, including, but not 
limited to, the implied warranties of merchantability and fitness for a 
particular purpose are disclaimed. There are no warranties that 
extend beyond the face hereof and the foregoing warranty shall not be 
extended, altered or varied except by written instrument signed by In 
Focus.

Limitation of Liability

It is understood and agreed that In Focus’ liability whether in con-
tract, in tort, under any warranty, in negligence or otherwise shall not 
exceed the return of the amount of the purchase price paid by pur-
chaser and under no circumstances shall In Focus be liable for special, 
indirect or consequential damages or lost profits, lost revenues, or lost 
savings. The price stated for the product is a consideration in limiting 
In Focus’ liability. No action, regardless of form, arising out of the 
agreement to purchase the product may be brought by purchaser 
more than one year after the cause of action has accrued

Summary of Contents for LP 750 LiteMount



























Reviews: